A d m i n i s t r a t i o n 392 Type “Y” to delete the default.st file and save the current configuration(stored in config.st) as custdef.st, a custom default configuration file.The IAD saves the custom configuration file and displays the Utility menu.Display Event LogTo display the event log, type “E”. The IAD displays the event log (sampleshown):Figure 3.8 Event LogPress any key to page through the log.Clear “Last Reset Reason”Under certain circumstances, the IAD is able to determine the reason the IADwas reset. This information is stored and displayed when the IAD reboots, andis also displayed on the Current Configuration screen (Displaying the CurrentConfiguration on page 8-206), when known.After the reset reason is noted, you can delete the currently stored reset reasonfrom the IAD. To do so, type “A” on the Utilities menu. The IAD deletes anyexisting reset reason, and displays the Utility menu.