34 2 0 0 0 - A 2 - G B 2 3 - 0 0Upgrading the SystemPeriodically, Paradyne may provide new software that you will download tothe IAD to upgrade the system. You must use TFTP to perform the filetransfer when upgrading the entire system.NOTICE: Some gateways directly support file transfer as a means of upgradingIADs. For information, refer to the Voice Gateway manufacturer’soperating manual.To use TFTP, you must configure both the IAD and the computer thatcontains the TFTP Server program, a program for the computer that youlicense separately.Using TFTP Servers via LAN or WANBefore the IAD can access a LAN or Intranet-based TFTP server, you mustconfigure the IP address of the Ethernet port (page 2-16) on the same subnetas your TFTP server, and the IAD must be connected to the LAN.To access a WAN-based server, you must configure the T/E1 or SDSLInterface with a management DLCI or PVC and a WAN IP address. Forinformation about setting the IP address of the WAN port, see Setting theWAN Port IP Address on page 2-18 or WAN Configuration Menu onpage 4-48.Copying the Source FilesTypically, you will receive two ZIP files (a core ZIP file and an applicationZIP file) for each upgrade.First, extract each file into a single directory on your PC. Then, set thedirectory as the path that the TFTP Server will use to send files to the IAD(often identified as upload/download or outbound directory).Upgrading via TFTPIf your TFTP Server is not running, start it now and note the IP address of thecomputer it is running on. To upgrade the IAD software, follow the stepsbelow.1 On the Main menu, type “9” to display the Utilities menu (see Figure 3.6).2 Type “X” to display the File Transfer menu.
