178 2 0 0 0 - A 2 - G B 2 3 - 0 0Display POTS StatisticsThis report displays POTS statistics.Clear Media StatisticsTo clear network statistics, type “Z” on the Network Statistics menu. TheIAD displays the Clear Network Statistics menu, giving you the option ofclearing the statistics related to the IAD’s specific datalink protocol and WANconfiguration (i.e., ATM Statistics, Frame Relay DLCI Statistics, etc.).To permanently reset statistics for a specific protocol, type the option. TheIAD immediately resets all statistics for the specified protocol.Continue resetting network statistics, or press Escape to return to the NetworkStatistics menu.late collision Discarded transmitted frames because a collisionoccurred. No. of times that a collision is detected on aparticular interface later than 512 bit-times into thetransmission of a packet.excessive collision A count of frames for which transmission on aparticular interface fails due to excessive collisioncarrier sense lost No. of times that the carrier sense condition was lostor never asserted when attempting to transmit a frameon a particular interface. The count represented by aninstance of this object is incremented at most once pertransmission attempt, even if the carrier sensecondition fluctuates during a transmission attempt.underrun DMA underrun. Discarded outgoing packets becausethere are no packets waiting in the buffer.transmitter resets No. of transmitted packets after an error occurredParameter DescriptionLine X Active/Inactive Current status of line X.Active: Phone line connection is up.Inactive: Phone line connection is down.Buffers Rcvd No. of packets received from this POTS line.Buffers Sent No. of packets sent to this POTS line.Discarded Discarded packets due to Jitter Buffer Overrun. Theinternal Jitter Buffer is full and could not allocate anew free packet buffer.Underrun Discarded packets due to there are no packets waitingin the Jitter buffer.Parameter Description
