146 2 0 0 0 - A 2 - G B 2 3 - 0 0Display NAT Local Server TableWhen NAT is enabled, you can display the entries in the local server table.1 To display the table, type “O” on the NAT Configuration menu.2 Press any key to return to the NAT Configuration menu.Display NAT Alias TableWhen NAT is enabled, you can display the entries in the NAT alias table. Todisplay the table, type “E” on the NAT Configuration menu. Press any key toreturn to the NAT Configuration menu.Delete IP Address from NAT TablesTo delete an entry from the NAT Tables, follow the steps below.1 Type “X” on the NAT Configuration menu. The IAD prompts for the IPaddress.2 Type the IP address to delete and press Enter. The IAD updates the table,and displays the NAT Configuration menu.Delete NAT Local Server EntryTo delete a local server entry, follow the steps below:1 Type “Y” on the NAT Configuration menu. The IAD prompts for the entrynumber to delete.2 Type the number of the table entry and press Enter. The IAD displays thefollowing:Deleting NAT Local Server entry 1, Translated IP address115.3.3.1Translated Port 2, Standard Port 3The IAD updates the table, and displays the NAT Configuration menu.Report Entry DescriptionEntry Table entry numberLocal IP Address IP address in useLocal Port local port numberInternet Port Internet port numberProtocol The protocol used—TCP or UDPReport Entry DescriptionEntry number Table entry number (1 to 7)Local IP Address Local, or LAN IP addressInternet IP Address Internet IP address assigned
