28 2 0 0 0 - A 2 - G B 2 3 - 0 0• System Contact• System Name• System Location• SNMP Community• SNMP Trap Host IP AddressThe following SNMP traps are supported:• System reset• Attempts to access SNMP with an invalid community name• Starting and stopping TFTP within SNMPThe IAD supports MIBs for RFCs 1213, 1317, 1406, 1493, and 1463 as wellas af-vmoa-0174 (AAL2/LES MIB).SNMP Configuration MenuTo display the SNMP Configuration menu, type “7” on the Main menu. Eachof the menu’s configuration options is described below.Figure 3.2 SNMP Configuration MenuNOTICE: The strings you enter in SNMP are not case sensitive.Enable/Disable SNMP via IPTo Enable or Disable SNMP via IP, follow the steps below.1 Type “E” on the SNMP Configuration menu to enable or disable SNMP viaIP. The IAD displays the current status of SNMP.2 To enable SNMP, type “E” or “D” to disable. The IAD saves theconfiguration (if changed).
