14 2 0 0 0 - A 2 - G B 2 3 - 0 0Figure 2.1 Typical Grounding Diagram3 With the console cable connected, plug the AC power adapter into the IAD.This starts the IAD, and it executes the boot process to begin normaloperation. Verify that the Power indicator on the front panel illuminates.NOTICE: For “cold start” access, the IAD default (factory-set) IP address is192.168.1.254 on the Ethernet side.NOTICE: For “Ground Start” applications, all elements in the voice path must beset to “Ground Start.”NOTICE: As the IAD boots, it sends status messages to the console port. If youare connected, you will see the boot sequence progress.NOTICE: This unit should be installed by qualified service personnel only, andmust be connected to a socket outlet with protective earthingconnection.Logging in via a Terminal Emulation ProgramWith a serial cable connected, follow the steps below to log in to the IAD:1 Open a terminal emulation program (Hyperterminal, for example).
