Operating Instructions COMPAX-M / -SDigital inputs and outputs154O6♦ O6="1" indicates that the axis is at a standstill due to a STOP (I6) or BREAK(I1&I6).♦ O6 is reset when the axis moves again.O16♦ Only assigned if mark reference is activated (P35=1).♦ With "0", the mark disappears once the maximum feed length is reached (seePage 100)8.6.1.8 Diagrams:tttttttttI3Jog-I5StartI6StopVO4Readyto StartO5Progr. targetpos. reachedO6Out of actionafter stop00 1 2 3 4 5 6 7 80 COMPAX ready for new start.1 When using START at input I5, the outputs O4 and O5 are reset. The axis moves.2 Interruption using STOP at input I6. After idle, message at output O6 (3).4 START using I5. Positioning process is continued.5 Positioning process ended. Message via O4 and O5="1".6 Manual processing of axis. O5 and O4 ="0".7 Specification for manual processing ended. Drive decelerates.8 Manual process ended. Drive at standstill. Ready message for output O4 is set.Idle after stopor breakMark missingafter maximumfeed lengthIn data recordmemory modeCaption:
