Start-up manual COMPAX-M / S42Mating connectors for X1,..X4 from Phoenix are included with the following typedesignations:X1: MSTB2.5/6/STF-5.08 (with screw connection)X2: MSTB2.5/3/ST-5.08 (without screw connection)X3: MSTB2.5/2/ST-5.08 (without screw connection)X4: MSTB2.5/3/STF-5.08 (with screw connection)You can acquire Phoenix housings for these connectors and these can be usedonce adapted to our cables. Designation: KGG-MSTB2.5/(pin number).7.7.2 Connector assignment COMPAX 1000SL (overview)X12/1 housingX12/2 +8VX12/3 NCX12/4 REF-X12/5 SIN-X12/6 NCX12/7 GNDX12/8 ST+X12/9 +5 VX12/10 TEMPX12/11 COS-X12/12 COS+X12/13 SIN+X12/14 REF+X12/15 ST-X12: resolver / SinCos©X13/1 housingX13/2 NCX13/3 NCX13/4 A2 analogX13/5 N1X13/6 B1X13/7 A1X13/8 +5VX13/9 NCX13/10 NCX13/11 A2/ analogX13/12 N1/X13/13 B1/X13/14 A1/X13/15 GNDX1/2VX2/1X2/2X2/3X3/1+24 VX3/20VX4/1B+X4/2B-X4/3PEX6/2RxDX6/3TxDX6/4DTRX6/5GNDX6/6DSRX6/7RTSX6/8CTSX6/9+5VLNPEX1/1UX1/3WX1/4PEX1/5Br+X1/6Br-X1:motorbrakeX2:Ac supplyX3:controlvoltageX4:brakingresis-tanceX6:RS232X13: encoderX19/1 GNDX19/2 InputX19/10X19/11 emerg.-StopX19/12 enableX19/13 OverrideX19/14 GNDX19/15 OutputX19/16 OutputX19:In- andoutput/Emergencystop/enable/override/stand byX19/17 OutputX19/18 OutputX19/19 OutputX19/20 OutputX19/21 OutputX19/22 OutputX19/23 24VX19/24 stand by PX19/25 stand by SX19/3 InputX19/4 InputX19/5 InputX19/6 InputX19/7 InputX19/8 InputX19/9 InputX14(15)/1NCX17/1DA-channel 2X17/2DA-channel 3X17/3shieldX17/4GND 24VX17/5+24VX17/6GNDX17/7Sig.MNX17/8Sig. E2X17/9Sig. E1X14(15)/2RxCX14(15)/3TxCX14(15)/4RxDX14(15)/5TxDX14(15)/6RxC/X14(15)/7TxC/X14(15)/8RxD/X14(15)/9TxD/X17:DA-monitorinitiatorsX14/X15:HEDAX5: bus systems inputAssignment depends onthe bus systemX7: bus systems outputAssignment depends onthe bus systemThe assignment of X12 does not apply for the S3 option.Mating connectorsX1, X2, X3 and X4Bridges for test operation
