Start-up manual COMPAX-M / -SX13: Encoder interfaces, ...607.9.10 X13: Encoder interfaces, ...The encoder interfaces are available as options for COMPAX (excluding COMPAX1000SL). 2 channels are present; channel 1 can be equipped as the encoder inputand channel 2 as the encoder simulation. The necessary options are described onPage 179.With COMPAX 1000SL, an encoder interface is integrated in the standard unit.This can be configured either as the encoder input or encoder simulation.7.9.10.1 Encoder interfaces / analogue rpm specification for COMPAX(not COMPAX 1000SL)Connector X13 X13PinDesignation:Function with encoder inputor simulationFunction of channel 1 withoption I7 for COMPAXXX6X or COMPAX XX701 Housing Screen terminal:2 N2 Channel 2 zero impulse3 B2 Channel 2 track B4 2A Channel 2 track A5 N1 Channel 1 zero impulse Enable6 B1 Channel 1 track B +15V (<10mA)7 1A Channel 1 track A Input (±10V)8 +5V Output +5V9 N2/ Channel 2 zero impuse inverted10 B2/ Channel 2 track B inverted11 A2/ Channel 2 track A inverted12 N1/ Channel 1 zero impuse inverted Direction of rotation13 B1/ Channel 1 track B inverted -15V (<10mA)14 A1/ Channel 1 track A inverted Input (±10V)15 pinSub-D socketterminal stripScrewsUNC4-401891515 GND Reference pointThe "Incremental encoder" function is an option for which additional boardsare required . If the relevant options are available, the following applies:Channel 1: encoder input. Channel 2: encoder emulationWe can provide the relevant cables and a bus distributor for wiring up the encodersignals. Use these to implement various applications (see Page 179).When working with COMPAX XX6X (electronic transmission) and COMPAXXX70 (electronical curve control) variants, you can use option I7 via channel1 to implement an analogue speed specification (see Page 186).7.9.10.2 Area of application of process interfacesUnit variantsCOMPAX XX00 COMPAX XX30 COMPAX XX60 COMPAX XX70Encoder emulation """" """" """" """"Encoder input ! External pos.localization! SPEED SYNC! External positionlocalization(actual value)! Master position(set value)! Master position(set value)Analogue input ! SPEED SYNC - ! Master speed ! Master speedCycle / direction input ! SPEED SYNC - ! Master position(set value)! Master positionEncoder interfacesfor COMPAXEncoder interfacesforCOMPAX 1000SLAssignment onX13:
