HAUSER linear actuators177UnithardwareConnectorassignment / cableTechnical dataConfigurationPositioning andcontrol functionsOptimizationfunctionsInterfacesAccessories /optionsStatusParameterError list9.4 HAUSER linear actuatorsThe HAUSER "HLEc" linear unit is available with various cross sections:♦ HLE80C cross section: 80 mm x 80 mm up to 6m long♦ HLE100C cross-section: 100 mm x 100 mm up to 7m long♦ HLE150C cross-section: 150 mm x 150 mm up to 10m longHighly dynamic, modular linear axis "HPLA" with toothed belt drive or rack-and-pinion drive:♦ HPLA80: cross section: 80 mm x 80 mmup to 50m for rack-and-pinion, up to 20m for toothed belt♦ HPLA120: cross section: 120 mm x 120 mmup to 50m for rack-and-pinion, up to 20m for toothed belt♦ HPLA180: cross section: 180 mm x 180 mmup to 50m for rack-and-pinion, up to 20m for toothed beltElectric cylinder ET: with 50 - 1500 mm stroke. Tensile and shear forces up to21000 NVertical actuators with toothed belt: up to 2500mm stroke; up to 100kgpayloadThe attached transmissions are available with ratios of 3:1, 5:1, 7:1, 10:1 and 25:1.Please contact us if you require more information.If you are using, e.g. a rack-and-pinion drive, toothed belt drive or spindle drive,you can obtain the necessary initiators and initiator connectors and cable from us.We can also supply you with retaining material on request.Initiator set
