Regency City CV60E-1 Owners & Installation Manual

Also see for City CV60E-1: Owners & installation manual

owner's information18 | City Series CV60E-1Smart Thermostat (Transmitter Operation)The Smart Thermostat function adjusts the flame height in accordanceto the difference between the set point temperature and the actual roomtemperatures. As the room temperature gets closer to the set point theSmart Function will modulate the flame down.To activate this function, press the Thermostat Key (Fig. 1) until the word"SMART" appears to the right of the temperature bulb graphic (Fig. 11).To adjust the set temperature, press the Up or Down Arrow Keys untilthe desired set temperature is displayed on the LCD screen of theTransmitter (Fig. 12).Note. When Smart Thermostat is activated, manual flame height adjust-ment is disabled.Figure 12Figure 11: Smart Flame FunctionFan Speed Control**If the appliance is equipped with a hot air circulating fan, the speed ofthe fan can be controlled by the Proflame system. The fan speed can beadjusted through six (6) speeds. To activate this function use the ModeKey (fig.1) to index to the fan control icon (Fig. 13). Use the Up/DownArrow Keys (fig.1) to turn on, off or adjust the fan speed (fig. 14). Asingle “beep”will confirm reception of the command.Figure 13 Figure 14Remote Dimmer Control (Light)**The auxiliary function controls the AUX power outlet by the dimmablelight control. To activate this function use the Mode Key (fig. 1) to indexto the AUX icon (fig. 15 & 16).The intensity of the output can be adjusted through six (6) levels. Use theUp/Down Arrow Keys (Fig.1) adjust the output level (Fig. 16). A single“beep” will confirm reception of the command.Note: This function is available only with the IFC Control Module.Figure 15 Figure 16Split Flow control**The secondary burner is controlled by the split Flow. To activate thisfunction use the Mode Key (fig. 1) to index to the SPLIT FLOW modeicon (fig. 17 & 18).Pressing the Up Arrow Key will activate the secondary burner. Pressingthe Down Arrow Key will turn the secondary burner off. A single “beep”will confirm the reception of the command.Figure 17 Figure 18