Regency City CV60E-1 Owners & Installation Manual

Also see for City CV60E-1: Owners & installation manual

City Series CV60E-1 | 25owner's informationLevers to lower firebox glasstooltip6. Support the glass with one hand and open the 9 lower clamps.5. Pull the 3 lower glass gasket pads forward to release the glass.owner's informationtooltip6. Support the glass with one hand and open the 9 lower clamps.5. Pull the 3 lower glass gasket pads forward to release the glass.7. Locate the 2 levers below the glass and turn them both 90° in a clockwisedirection to lower the firebox glass panel.8. Carefully lean glass forward onto support.Glass panel--leaning on supportLower clamps (x9) in open positionPush down on levers to lower glass panelGasket padNOTE:The firebox glass may remain propped on the glass supports to cleanthe interior surface. Use care when cleaning -- do not apply excessive forceor pressure.9. To remove the firebox glass panel from the unit: tilt the glass forward gently onto theglass supports, grip both suction clamps and lift the glass up and out ofthe unit.10. To install glass--reverse steps.IMPORTANT:Remove glass panel completely when installing or removing panels,logs, media, etc. to avoid causing any damage to the glass.7. Locate the 2 levers below the glass and turn them both 90° in a clockwisedirection to lower the firebox glass panel.8. Carefully lean glass forward onto support.Glass panel--leaning on supportLower clamps (x9) in open positionPush down on levers to lower glass panelGasket padNOTE: The firebox glass may remain propped on the glass supports to cleanthe interior surface. Use care when cleaning -- do not apply excessive forceor pressure.9. To remove the firebox glass panel from the unit: tilt the glass forwardgently onto the glass supports, grip both suction clamps and lift the glassup and out of the unit.10. To install glass--reverse steps.IMPORTANT: Remove glass panel completely when installing or removingpanels, logs, media, etc. to avoid causing any damage to the glass.