Regency City CV60E-1 Owners & Installation Manual

Also see for City CV60E-1: Owners & installation manual

76 ............................................. |City Series CV60E-1installation76 | City Series CV60E-1Bulb Replacement1. Turn off power and gas to unit and allow to cool to room temperature.2. Remove outer safety glass panels and inner panels (firebox glass)–seeinstructions in this manual.3. Loosen 2 screws on each side of individual inner light cover and remove.4. Replace bulb and reverse steps to complete procedure.NOTE: Do not handle bulb with bare hands. Use packaging or a tissue to holdnew bulb when replacing.Regency Part# 911-208 Oven Lamp Assembly G9 120V/25WRegency Part# 911-072 Replacement Bulb G9 120 Volt/25 wattLights are located behind the front face of the unitInner light covers shown from belowInner light covers close upInner light cover reassembly order22 | City Series CV60Eowner's informationBulb Replacement1. Turn off power and gas to unit and allow to cool to room temperature.2. Remove outer safety glass panels and inner panels (firebox glass)–seeinstructions in this manual.3. Loosen 2 screws on each side of individual inner light cover and remove.4. Replace bulb and reverse steps to complete procedure.NOTE: Do not handle bulb with bare hands. Use packaging or a tissue to holdnew bulb when replacing.Regency Part# 911-208 Oven Lamp Assembly G9 120V/25WRegency Part# 911-072 Replacement Bulb G9 120 Volt/25 wattLight are located behind the front face of the unitInner light covers shown from belowInner light covers close upInner light cover reassembly orderLight coverLight glassLight gasketLight coverLight glassLight gasket