Samsung OfficeServ 7200 Technical Manual

Also see for OfficeServ 7200: System administration guide User guide User instruction User guide User manual

Contents

MANUAL SIGNALLINGUse this feature when you want to send a brief 500ms ring burst to another sta-tion, regardless of the status of your phone (on-hook, off-hook, handsfree, DND, orringing).To send a signal to another station:• Press the Manual Signalling (MS) button.• You may press the MS button repeatedly to send multiple signals to the des-ignated station.NOTE: Your phone must have a Manual Signalling (MS) button with a stationnumber extender assigned to it.OFF-HOOK VOICE ANNOUNCEKeysets may receive a voice announcement while on another call. The calling sta-tion must have an OHVA button. When you are in DND, you cannot receive OHVAcalls. The OHVA feature will work with intercom and transferred calls.When you receive an OHVA and secure OHVA is ON, you will hear the announce-ment in the handset receiver, if you are using the handset. If secure OHVA is OFFthen you will hear the announcement on the speaker, if you are talking on thehandset. If you are using the speakerphone the announcement will always beheard through the speaker.To make an off-hook voice announcement:• Dial the extension number or press the DSS button.• When you receive a busy signal, press the OHVA button.• After the attention tone, begin speaking.• Finish the call by replacing the handset or pressing the ANS/RLS button.• Press the flashing CALL button on your keyset. This will place the originalparty on hold and allow you to talk to the announcing party.• To return to your first party, press the button corresponding to your originalcall. This will disconnect the OHVA call.NOTES:1. When you are voice announcing to a station close to you, use the handset toavoid an echo effect.2. You cannot off-hook voice announce to single line telephones.41GROUP LISTENINGWhen you are engaged on a call and you are using the handset, you may wantother people to hear the distant party’s voice over the speaker:• Press the LISTEN button to turn on the speaker.The microphone is not in use,so the distant party does not hear other parties present in your office.• Press LISTEN again to turn the speaker off and resume private conversation.• Repeat if necessary.NOTE: Depending on speaker volume and the acoustics of your office, it may beadvisable to turn the group listening feature off before hanging up. This will elim-inate a momentary squeal.ACCOUNT CODESWhen equipped with optional equipment, your system will allow calls to becharged to a specific account.• During any outside C.O. call, press the account (ACC) button.• Enter the 3 digit account code bin number when prompted, ORIf your button has an extender of 000 enter the account code (maximum 12characters including Q and #) and press ACC000 again, ORIf your button has an extender other than 000 (001~999) account code con-tained in that bin will automatically be entered for your.LOCKING YOUR KEYSETYou can lock your keyset to control misuse of your phone while you are away. Youcan unlock it when you return. Your default station passcode is 1234.• While on-hook, press TRANSFER and then dial 100.• Dial your four digit station passcode.• Dial 1 to locking outgoing, 2 for locked all calls, or 0 to unlock.• Press TRANSFER to store your selection.400UNLOCKED1LOCKEDOUTGOING2LOCKEDALL CALLSMake outside calls YES NOACCESS DENIED NOReceive outside calls YES YES NOMake intercom calls YES YES NOReceive intercom calls YES YES NO