2827MANAGING KEY ASSIGNMENTSYou can view station key assignments and add extenders to some of the program-mable keys for easy one touch operation of frequently used features.An extender is a number that makes an otherwise general key very specific. Add-ing the digit “4” to a PAGE key defines this key for paging zone four. Adding “225”to a directed pickup key will define this key as pickup for extension 225 only. Thekey must already be assigned by the installing technician.Use this program to assign extenders to the following keys:KEY DESCRIPTION EXTENDERBOSS ..............Boss/Secretary ..............................(1–4)DP ..................Direct Pickup ................................(Extension number orstation group number)DS....................Direct Station ................................(Any extension number)FWRD ............Call Forwarding ............................(0–7)GPIK ..............Group Pick-Up ..............................(01–20)IG ....................In/Out of Group ..........................(Any group number you are part of )MMPG ..........Meet Me Page ..............................(0–9, 4)PAGE ..............Page ................................................(0–9, 4)PARK ..............Park (orbits) ....................................(0–9)RP....................Ring Plan ........................................(1–6), HOLD for noneSPD ................Speed Dialing ................................(00–49, 500–999)PMSG ............Programmed Messages ............(01–30)DIR ..................Directory..........................................PERS (1), SYS (2) or STN (3)VT....................Voice Mail Transfer ......................Voice Mail Group501–519 for the iDCS 100 R2501–529 for the iDCS 500 R2 M501–549 for the iDCS 500 R2 L501–529 for the OfficeServ 7200SG....................Station Group ................................501–519 for the iDCS 100 R2501–539 for the iDCS 500 R2 M501–579 for the iDCS 500 R2 L501–539 for the OfficeServ 7200PROGRAM KEYSUP & DOWN - Select the extension number.KEYPAD - Used to enter extender codes.HOLD - Used to clear the displayed data.Open customer programming and follow the instructions below.ACTION DISPLAY1. Press TRSF and then dial 107 [201] KEY EXTENDDisplay shows the first station 01:CALL12. Dial the station number (e.g., 205) OR use [205] KEY EXTENDUP or DOWN to scroll through the station 01:CALL1numbers and press the right soft key tomove the cursor3. Enter the key number (e.g., 18) OR use [205] KEY EXTENDUP and DOWN to scroll through the keys 18:DSand use the right soft key to move thecursor OR press the key to be programmed4. Dial the extender according to the listabove and the system will display yourselectionIf there are no more entries, pressthe left soft key to return to step 25. Press TRSF to store and exit programming [205] KEY EXTENDOR press SPK to store and advance to the 18:DS207next program