15Authentication Server Related Set/ModifyThe fifth item [5. Server] sets or modifies settings related to the authenticationserver. Select the [5. Server] item and move to the lower level. The screen below isdisplayed.You can set/modify the IP address of the authentication server at the [1. Server IP]item. The screen below is displayed when you enter the item. The server IP is theIP address of the MCP2.You can confirm the current IP address of the authentication server at the LCDpanel.The address is left blank if it is not set. Use the dial buttons from [0]-[9], and[4] to set the IP address and press the [ENTER] button among the navigation but-tons to save and exit.You must input the ID assigned to your ITP phone. See your phone system admin-istrator to get this value. Press the [ENTER] button to save and exit.You must input the password associated with your ID. See your phone systemadministrator to get this value. Press the [ENTER] button to save and exit.Completion of SettingsVerify settings at the first item [1. Information] after setting all of the above items.Select the sixth item [6. Exit] to save all modified settings and reboot the ITP-5012L phone.1.Server IPInput ServerIPxxx.xxx.xxx.xxx4 Input Idxxxx4 Input PasswordxxxxLoad and Upgrade Set/ModifyThe third item [3. Load & Upgrade] sets or modifies the IP phone’s software ver-sion. Use extreme caution when upgrading the keyset.Select the [3. Load & Upgrade] item and move to the lower level. The screenbelow is displayed.Item not visible in the first screen:In the [1.Load Option] item, move to the lower level and select [2. File System].Each of the items [2. Upgrade Program] and [3. Upgrade Bootrom] are used forupgrading program and bootrom. Set the IP of the TFTP server you wish toupgrade and press OK.The [4. Format] item is used for deleting all programs and data except bootrom.CAUTION: For engineering purposes only. The format option should not be usedunless instructed by an Authorized Samsung Engineering or Technical SupportRepresentative.1.Load Option2.Upgrade Program3.Upgrade Bootrom4.Format14
