n The current Directory Name will be played as a string of digits that areequal to your name spelled out on your telephone keypad. Follow theinstructions to enter a new name.You will be prompted to enter your lastname and then your first name.This must be done in order for the directory feature to work correctly.Note: It is possible that if you do not record your name (described above)and/or enter your Directory Name, you will not be included in the Dial byName Directory.4 Extended PromptingUse this option to drastically reduce the number of prompts played in thesubscriber interface (mailbox prompts). Change this setting only if you arevery familiar with the user operation of the SVMi E-Series.Note: Remember if you know what digits to press, you can enter them at anytime you do not have to wait to be prompted. This feature can be toggledon/off at anytime. Also if it is off you will be prompted within each subscribermenu to press zero for more options. This enables you to still be able to findout what to do if you were to get lost and extended prompting was disabled.KEYSET USER FEATURESThe following options are available if you have a display keyset.They require setupby the System Administrator.Message Waiting LightsWhen new messages are left in your mailbox, the voice mail message light on yourkeyset will flash. Press this flashing key [VMMSG] and follow the prompts toretrieve messages.This key may be pressed at any time to log into your SubscriberMain Menu.Answer Machine EmulationIf you have an Answer Machine Emulation key programmed on your keyset, youcan use it to monitor calls going to your voice mail, and optionally answer them.The operation of this feature is similar to screening a call on a home answeringmachine.Your keyset must be set to forward on no answer to voice mail. After ringing yourstation the caller will be connected to your voice mail and hear your personalgreeting before leaving a message. During this time you will be monitoring theconnection between the caller and your voice mail box. At this time you will onlybe monitoring the call, you can not talk to the other party until you answer. Youmay pick up the call at any time or ignore it.90To activate this feature press the AME button. The associated indicator will be litsteady. Press again to turn off. If this key is pressed while a station is ringing (dur-ing forward no answer), the feature will be turned on for the current call only.While the caller is leaving a message or ringing you may:n Press [#] to immediately put the caller in your voice mailbox and monitor it.n Press [] to immediately disconnect your station.The caller continues to leavea message normally.n Pick up the handset and monitor privately.n Press ANS / RLS to answer the call (using the handset or speaker).AME PasswordIf your keyset has AME Password (MMC 110) set to Yes, you must enter your sta-tion password to listen to messages being left.This will prevent unauthorized peo-ple from listening to messages being left for you.If the password option is turned on, while a message is being left, press the flash-ing AME indicator and enter your station password (not your SVMi E-Series pass-word). You will then hear the message being left.Call RecordIf you have a call record button assigned to your phone, you may press it at anytime, to record the conversation in progress. If you have a display keyset, you willalso have the soft key options to pause and time the message.91
