30NEW MESSAGE (SEND)This function is used to create and send a new short text message.• Press the Menu soft button, scroll to Message, then press OK. Scroll to ShortMessage [], then press OK. Scroll to New Msg, then press OK.• Write or create a new short message and press the Next soft button. See TextInput Method on how to enter characters in text messages.• Enter the internal extension(s) to send the short message. Scroll to otherentries and enter the station number to send to more users. (Each short mes-sage can be sent to 1 to 10 users).• Press the Send soft button to deliver the short message to other user’s inbox.NOTE: When the message is sent successfully, the message “Sent” is displayed.When the message fails to send the “Failed to send” is displayed. SMS messagescan only be sent to internally ITP, SMT-W, or SMT-i phones within the same node.TDM and single line phones cannot send or receive SMS messages. SMS messag-ing is not supported over networking.OUTBOXThis function is used to edit and resend a new short text message.• Press the Menu soft button, scroll to Message, then press OK. Scroll to ShortMessage [], then press OK.• Scroll to Outbox, then press OK to view short text message sent from yourphone.• Scroll to the desired SMS MSG.• Press the Del soft button, then Yes soft button to delete the short text mes-sage or press the End soft button to exit SMS.NOTE: SMS messages indicated by X icon cannot be deleted from the Outbox.DELETE ALLThis function is used to delete the short message(s) saved in both the Inbox andthe Outbox.• Press the Menu soft button, scroll to Message, then press OK. Scroll to SMS,then press OK.• Scroll to Delete All, then press OK to view short text message sent from yourphone.• Press the Del soft button to delete the short text message or press the Endsoft button to exit SMS.NOTE: SMS messages indicated by X icon cannot be deleted from the Outbox.314. SOUNDThis function is used to adjust the selected volume levelson each phone. This is the same option as station lock inMMC 114.• Press the Menu soft button, scroll to Sound, then press OK. Scroll to RingTone, or Key Tone or Volume, then press OK.• Using the Call Log ss / Phonebook tt buttons adjust the volume or sound,then press OK and Save soft button.5. SECURITYThis function is used to select the option for each user tochange station password, lock or unlock each phone.Thisis the same option as station lock in MMC 100.• Press the Menu soft button, scroll to Security, then press OK.• Enter the station password [default 1234].• Press OK to Change Password and press Back soft button.• In the Dial mode, use the Left [<-] and Right [->] soft buttons to choose theUnlock, Lock Out (Outgoing), or Lock All option from the menu.• In the Menu mode, use the Left [<-] and Right [->] soft buttons to choose theUnlock or Lock M option (Station locked from changing the Dial Mode) fromthe menu.• In the Password mode, enter the current password (eg; 1234)• Enter the New Password. Re-enter the new password to confirm. Password ischanged.6. CALL FWDThis function is used to set/cancel call forwarding to eachphone.• Press the Menu soft button, scroll to Call Fwd, thenpress OK, scroll to forward option [Disable, All, Busy,No Answer, Busy/No Answer, DND or Follow MeStatus], then press Edit soft button.• Enter the Station or Group Number to forward calls, then press OK or Save.7. SETTINGSThis function is used to allow station users to set the DialMode to Enbloc or Overlap dial, set the Language, viewthe station network Info settings, to view the phonefirmware and boot version, or to clear user settings, suchas the call log and phonebook.
