4PREPARATIONCHECK THE CONTENTS OF THE BOXCheck if the product package box includes all the components as follows:• Phone body including a base• Handset• Handset cord• Patch cableNOTE: Power transformer sold separately. If any of these items are missing or dam-aged, please contact your dealer.PHONE INSTALLATIONConnecting the Phone Body1 Remove the base of the phone bypressing the [Push] mark on the topof the base.Note: The base can be used to adjustthe phone angle in the high or lowposition.2 Connect a handset to the handset portof the phone. (See handset icon )3 OPTIONAL: Connect the cablethrough the middle hole of the cradleto the PC, as shown in the figure.When connecting to PC, connect oneend of the cable to the PC port of thephone, and the other end of the cableto the LAN port of the PC.qweqAC Power (5VDC) wHeadset eHandset Cord rLAN to Phone System tPhone to PCrtOPTIONAL EQUIPMENTSMT-i5264 [ADD-ON MODULE]The SMT-i5264 IP AOM can be registered and programmedto function with any ITP 5100 keysets, SMT-i Series, and TDMphones. This add-on module was cosmetically designed tomatch the SMT-i5000 Series phones. In some applicationsmultiple IP AOMs can be supported per IP phone. For instal-lation instructions, see your System Administrator.5Connect the LAN cable to the LAN port of the phone, as shown in the figure.When power is supplied from the LAN port (PoE), the phone is booted uponLAN connection.If PoE is not supported, connect the power adapter to the power port of thephone. If the connected power adapter is plugged into an outlet, the phoneis booted. (The power adapter is supplied separately.)4 Fix the base to the phone body byfitting the bottom groove and thensecuring the top side.5 Secure the cable along the cableguideline as shown in the figure. Forthe cable of power adaptor, givesome slack before securing the cableto the guideline to prevent easydisconnect.
