21Open customer programming and follow the instructions below.ACTION DISPLAY1. Press TRSF and then dial 705 SYS SPEED DIALDisplay shows the first number 500:2. Dial the speed bin desired (e.g., 505) OR SYS SPEED DIALpress UP or DOWN to choose and 505:press the right soft key to move the cursor3. Enter the access code (e.g., 9—the system SYS SPEED DIALwill automatically insert a dash) followed by 505:9–121223456789the phone number (up to 24 digits long)and press the right soft key to return tostep 24. Press the F key to toggle to Program SYS SPEED NAMESystem Speed Dial Names, step 3 to 505:enter the name5. Press TRSF to store and exitprogramming OR press SPK to storeand advance to the next programDEFAULT DATA: NO SPEED NUMBERS ASSIGNEDPROGRAM SYSTEM SPEED DIAL NAMESThis program is used to assign a character name or identification for each systemspeed dial location. This name enables you to locate the speed dial number whenyou are using the directory dial feature.You may assign a name 11 characters long.PROGRAM KEYSUP & DOWN - Used to scroll through speed dial bins.KEYPAD - Used to enter selections.SOFT KEYS - Move cursor left and right.SPK - Used to store data and advance to next program.HOLD - Used to clear previous entry.ACTION DISPLAY1. Press TRSF and then 706 SYS SPEED NAMEDisplay shows the first name 500:2. Dial the system speed number (e.g., 505) SYS SPEED NAMEOR press UP or DOWN to select the entry 505:number and press the right soft key tomove the cursor3. Enter the name as shown in Program SYS SPEED NAMEStation Names and press the right soft 505:SAMSUNGkey to return to step 2 OR press theF key to toggle to the speed dial numberto return to Program System Speed DialNumbers, step 44. Press the right soft key to return to step 2above OR press TRSF to store and exitprogramming OR press SPK to store andadvance to the next program22