Sanyo PLC-WM4500/L - 4500 Lumens Manual

Also see for PLC-WM4500: Owner's manual User manual Owner's manual Owner's manual Manual

Contents

PLC-WM4500/WM4500L Expand Serial Command Functional Specifications26/788.6 Input Control Command8.6.1 CF_INPUT CommandCommand “CF_INPUT_%1” [CR]%1“1”------------------------- Select Input 1 (not switching Source)“2”------------------------- Select Input 2 (not switching Source)“3”------------------------- Select Input 3 (not switching Source)“UP”---------------------- Increment Input No. by 1(Input1→Input2→Input3→Input1→ - - -)“DN”---------------------- Decrement Input No. by 1(Input3→Input2→Input1→Input3→ - - -)DetailsSelect Input (Available only in the normal Power ON status)This command switches only Input No, not Source. For instance, when Input 1has been selected, receiving the command to select Input 1 does not invokesource-switching operation. That means it operates differently from “INPUT”button of Projector or Remote Control.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.6.2 CF_SOURCE CommandCommand “CF_SOURCE_%1” [CR]Input 1“ANALOG” ------------ Select RGB (PC Analog) Input“SCART” --------------- Select RGB (Scart) input“HDMI” ----------------- Select HDMI input“UP” ----- Select in PC Analog → Scart → HDMI → PC Analog order“DN” ----- Select in PC Analog → HDMI → Scart → PC Analog orderInput 2“VIDEO” ----------------- Select Video input“YPBPR”----------------- Select Y,Pb/Cb,Pr/Cr input“ANALOG” -------------- Select RGB input“UP” ---------- Select in VIDEO → YPBPR → RGB → VIDEO order“DN” ---------- Select in VIDEO → RGB → YPBPR → VIDEO order%1Input 3“VIDEO” ---------------Select Video input“S-VIDEO” -------------- Select S-Video input“YPBPR” --------------- Select Y,Pb/Cb,Pr/Cr input“UP” ------- Select in VIDEO → YPBPR → S-VIDEO → VIDEO order“DN” ------ Select in VIDEO → S-VIDEO → YPBPR → VIDEO orderDetailsSelect Source of currently selected Input (Available only in the normal Power ONstatus)When selected input does not include specified %1, error code “101” is returned andit is not executed.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.6.3 CF_INPUT 1 CommandCommand “CF_INPUT1_%1” [CR]%1“ANALOG” ------------------------- Select PC Analog Input“SCART” --------------------------- Select SCART Input“HDMI” ---------------------------- Select HDMI InputDetails Select Input 1 as well as Source specified in %1 (Available only in the normalPower ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]