PLC-WM4500/WM4500L Expand Serial Command Functional Specifications41/788.10.15 CF_PIPMODEFREE CommandCommand “CF_PIPMODEFREE_%1” [CR]%1“USER1” --------------------------- Set User1 to Free status“USER 2” -------------------------- Set User2 to Free status“USER 3” -------------------------- Set User3 to Free status“USER 4” -------------------------- Set User4 to Free status“USER 5” -------------------------- Set User5 to Free statusDetailsDelete the data registered in Custom User1–5 and returns it to Free status.This command operates the same way as setting Mode free for User1-5 in “Picturein Picture” Menu.(Available only in the normal Power ON status)*When there is only one user mode of stored state, return “101” [CR]Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.16 CF_PIPRST CommandCommand “CF_PIPRST_%1” [CR]%1 “RST” ---------------------- Reset current setting statusDetails Reset current setting status of “Picture in Picture”.(Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.17 CF_ HDMI SETUP CommandCommand “CF_ HDMI SETUP _%1”[CR]%1 “NORMAL” -------------------------- Select Normal mode“ENHANCED” ---------------------- Select Enhanced modeDetailsSelect image mode of HDMI setup.The status set by this command is stored in EEPROM and its setting is effectiveafter ALL is OFFThis command is available in normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.10.18 CF_HDMI SOUND CommandCommand “CF_HDMI SOUND_%1”[CR]%1 “HDMI” ----------------------- Select PCM sound (Digital sound)“EXTERNAL” ------------- Select External sound inputDetailsSelect sound mode of HDMI setup.The status set by this command is stored in EEPROM and its setting is effectiveafter ALL is OFFThis command is available in normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]