Sanyo PLC-WM4500/L - 4500 Lumens Manual

Also see for PLC-WM4500: Owner's manual User manual Owner's manual Owner's manual Manual

Contents

PLC-WM4500/WM4500L Expand Serial Command Functional Specifications48/788.11 Other Commands8.11.1 CF_KEYEMU CommandCommand “CF_KEYEMU_%1” [CR]%1“RIGHT” ---------------- Move Pointer rightward in On-Screen Display Menu“LEFT” ------------------ Move Pointer leftward in On-Screen Display Menu“UP” ---------------------- Move Pointer to upward On-Screen Display Menu“DN” --------------------- Move Pointer to downward in On-Screen Display Menu“SELECT” -------------- The same operation as “SELECT” button of RC“AUTOPC” ------------- Execute Auto PC Adj. operationThe same operation as “AUTO PC” button of RCWhen this is sent during Auto PC Adj. operation, the operation isstopped. This is same way as pressing “AUTO PC” button of RC.DetailsThis command is behaving the same as corresponding keys of Projector.Once Auto PC adj. is started with “AUTOPC” command, it does not stop withreceiving the command another time.*When transmit command of CF_KEYEMU parameter- When User menu is displayed: function is carried out with having displayedUser menu.- When User menu isn’t displayed: error code “000” is returned, function isnon-practice.* "101" is not returned even if a command of CF_KEYEMU is transmitted whencursor moves to the item which cannot toggle at an edge of the main menu.- example:Display main menu, and move to second menu of Image adj.Move a cursor to "Quit" position, and transmit a command of KEYEMU_DN. Thena cursor doesn't toggle and "000" is returned.*When transmit command of CF_KEYEMU AUTOPC- When practice of Auto pc adj is possible: Function is practice, “000” is returned.- When practice of Auto pc adj is impossible: display exclamation mark, “000” isreturned.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.11.2 CF_MENU CommandCommand “CF_MENU_%1” [CR]%1 “ON” --------------------- Display On-Screen Display Menu“OFF” -------------------- Hide On-Screen Display MenuDetails Set On-Screen Display mode.(Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]