116Printing33.2 Printing TransparenciesThis section describes how to print transparencies.For information about using Tray 5 (bypass tray), refer to “4.2 Loading Paper” (P.151).3.2.1 Loading TransparenciesFor transparencies, load them into Tray 5 (bypass tray) or Tray 1.Transparencies with white borders or full color transparencies cannot be used.Procedure■ For Tray 5 (bypass tray)1 Load the transparencies with the sideto be printed facing down.2 Fan transparencies in small amountsbefore loading.■ For Tray 1The procedure of loading transparencies into Tray 1 is the same as theprocedure for loading standard-size paper. Refer to “4.2.1 Loading paper intoTrays 1 to 4” (P.151).Also, you must set the paper type for the tray to transparency.To change the setting, refer to “3.4 Changing Paper Types” (P.128).Side to beprinted
