Setting Printer Environment6211.8 Installing the Adobe PSPrinter Driver (Windows NT)Install the AdobePS 5.2.2 printer driver onto Windows NT by following the procedure below.It is possible to cancel installation of the printer driver by clicking Cancel in the dialog box displayed during instal-lation. You can also click Back to delete the settings in that dialog box and return to the previous dialog box.1.8.1 Installation ProcedureProcedureAuto Run procedure1 Power on the printer.2 Power on your computer running Windows NT.When the printer is connected to the computer, a dialog box indicating that newhardware has been detected maybe displayed when you activate Windows NT.In this case, click Cancel to close the dialog box.3 Insert the 8124 Auto Installer CD into your CD-ROM drive.If the CD-ROM does not start automatically, go to My Computer and double clickthe CD-ROM drive icon.4 After reading the License Agreement Click the I Accept button.5 Click the Install button on PS Driver to start the driver installation.6 Click Exit when the driver installation is complete.This installs the TallyGenicom 8124 printer onto local lpt1: port.The driver needs to be configured correctly before sending a print job to the printer, go to step 16below:
