1193Printing3.3 Printing Non-Standard/Long Paper SizesThis section describes how to print non-standard paper sizes such as long paper.The following paper sizes can be used in this printer.● Non-standard paper sizes of less than 135 mm on a side cannot be output to the Face Up Tray (optional).● Printing long paper sizes (length: 431.9 to 1200 mm) requires memory of 384 MB or more.● Long paper sizes cannot be printed even if [High Resolution] is selected in [Print Mode].3.3.1 Loading Paper of Non-Standard SizesThis section describes how to load paper of non-standard sizes.For Tray 5 (bypass tray)This procedure loads long-size paper into Tray 5 (bypass tray) as an example.● To load paper of non-standard sizes other than long-size paper, refer to “4.2.2 Loading Paper intoTray 5 (bypass tray)” (P.153).● To use the Banner Tray (optional), refer to “When using the Banner Tray (optional)” (P.120).Procedure1 Load long-size paper in Tray 5 (bypasstray) with the side to be printed facingdown and the end of the paper curledas shown in the figure.● Curl the end of the long-size paper at the location asfar as possible from the paper supply section.Otherwise, the curled end may be caught in the papersupply section, resulting in creased or wrinkledpaper.● Load only one sheet of paper at a time. For Tray 1 For 2 to 4 For Tray 5 (bypass tray)* Except for the sizes with a shortedge less than 182 mm and a longedge exceeding 297 mm.* Except for the sizes with a shortedge less than 182 mm and a longedge exceeding 297 mm.Long edge(horizontal): 148 to 431.8 mmFeedingdirectionShort edge(vertical):182 to 297 mmLong edge(horizontal): 182 to 431.8 mmFeedingdirectionShort edge(vertical):182 to 297 mmLong edge (horizontal):98 to 431.8 mmLong paper Size:431.9 to 1200 mmFeedingdirectionShort edge(vertical):90 to 305 mmSide to beprinted
