4.2 Loading Paper1544About Paper4 Adjust the paper size guide to fit thepaper loaded.5 If you changed the type of paper loaded, change the paper type on theprinter driver.To print without using the printer driver, like printing from a medium, set [Paper Type] on the controlpanel. For more information, refer to “Paper Type” (P.185).“4.1 About Paper” (P.146)4.2.3 About the Auto Tray SwitchIf you select [Auto] from the [Paper Source] menu on the [Tray/Output] tab in the[Properties] dialog box of the printer driver and specify printing, the printerselects the appropriate tray based on the size and orientation of the document tobe printed. This is called Auto Tray Switch.If there are multiple appropriate trays in Auto Tray Switch mode, the tray isselected according to the priority for paper type. If multiple paper types have thesame priority, the tray is selected according to the priority for the tray.● Auto Tray Switch is not applied to the paper type for which the priority for the paper type is not set.● If no appropriate tray is found in Auto Tray Switch mode, a message prompting you to feed paperwill appear. You can also select the setting for printing to the paper of almost the same size as thedocument or larger size paper without displaying this message. (Replacement of paper)● When a paper tray runs out of paper during printing, the printer selects another tray with the samepaper size and orientation to continue printing. In this case, the printer does not switch to the traywith the paper type for which [Paper Priority] is set to [Off].● Set the priority for paper type by using the control panel. Set the priority for paper tray by using thecontrol panel or Embedded Web Server.● “5.2.2 The System Administrator Menu” (P.171)● “1.4.2 Using Embedded Web Server” (P.41)
