4.1 About Paper1494About Paper4.1.2 Paper that cannot be usedDo not use the following paper.Contact our Customer Support Center or your dealer if you have any questions.● Transparency with whiteborder like FUJI XEROXFull Color TransparencyExample: V556, V558,V302● Transparency for an inkjet printer● Digital coat glossy type● Heat-sensitive paper● No. 2 registered drawing● Tracing paper● Cloth transfer/color cloth transfer paper● High class Japanese paper for color copy● Paper only for an ink jet printer● Black or dark color paper● Electric spectaculars film● Aqua-transfer paper● Xerographic photo paper● Tucked film● Coated paper of 126 g/m2 or less● Paper that is too thick or thin● Carbon paper● Envelopes with concavity and convexityor catches● Wrinkled, creased, or torn paper● Paper which was printed once by an otherprinter or copy machine● Treated colored paper● Paper which is tightly stuck together dueto static electricity● Paper with non-smooth face such asrough printing paper or fibered paper● Specially-coated paper● Paper with staples, clips, ribbons, or tape● Bonded or glued paper● Paper which has been previously printedwith ink that will change in quality at155°C● Damp or wet paper● Envelopes on which thesealing part is sticky withglue● Labels on which the matboard is not entirelycovered by the labels● Pre-cut labels which areloaded in the orientationas shown in the figure● When using acid paper, the print resultmay blur. If so, change the paper to acid-free paper.Full colortransparencyJ, J-D coated paper is available.Sticky with glueNot entirely coveredPre-cutCan be used when loading itinto Tray 5 (bypass tray) inorientation.
