5.2 Description of Common Menu1715Setting Control Panel5.2.2 The System Administrator MenuThe menu for configuring the settings for Network/Port, System Settings (suchas alert tone, power saver mode), Printer Settings, Allocate Memory, ImageQuality, initializing the printer’s settings or the hard disk, removal of form data.Network/PortThe menu to configure necessary settings for the type of interface connected tothe computer and communication in the network.ParallelSet when using a parallel interface.■ Port StatusSet the status to [Enable] or [Disable] in parallel interface when switching off the power. Default is[Enable], which allows the use of the parallel interface.Set the status of ports that are not used to [Disabled] or change the memory allocation capacity, in case ofinsufficient memory.■ Print Mode*1 (P.191)Set the process method (targeted print language) of the print data.[Auto] (default)The proper process is automatically selected according to the language of the data received from thecomputer.[PS] [HP-GL/2] [PCL] [TIFF]■ PJL *2 (P.191)You can use the PJL command with this printer, which does not depend on any print language. ThePJL command controls the print job, and is necessary when you use the printer driver. Setting thestatus of the PJL command sent from the computer to enabled or disabled. By using the PJLcommand, you can select the print language for the next data, even if the printer is under anotherprocess in any print language. Set [Enable] for normal use. Default is [Enable].
