Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 10 page image

10 TASCAM DP-032 – Quick Start GuidesPlayback and mixingIn this section, we will play back the demo song on theincluded SD card.When this unit is purchased new, the SD card with thedemo song on it is already installed in the unit, but wewill start by explaining how to insert an SD card using theprocedures below.Preparations1 Open the SD card slot cover on the left side paneland insert the included SD card into the slot.CAUTIONBe careful not to forcibly insert the card in the wrongdirection. Doing so could damage the slot or the card.2 After inserting the SD card, close the card slotcover.3 Connect the included AC adaptor (TASCAM PS-1225L) to the DC IN 12V connector on the rearpanel.AC outletTASCAMPS-1225LDC plugCAUTIONNever use any adaptor other than the TASCAM PS-1225L AC adaptor (included), because it is designed forthe power requirements of this unit. Use of a differentadaptor could cause malfunction, fire or electric shock.There is a hook for holding the AC adaptor cordin place (cord holder) on the bottom panel. Whenusing the adaptor, wrap the cord around this hook toprevent it from being disconnected during use.4 Connect headphones to the PHONES jack on therear panel.Headphones5 Press the STANDBY/ON button on the rear panel toturn the power ON.Startup ScreenAfter the unit starts the Home Screen appears on thedisplay.Home ScreenCAUTIONDo not remove or insert an SD card when the power•is ON. Always turn the power OFF (standby) beforeremoving or inserting a card.If you remove or insert an SD card when the power•is ON, all recorded data and settings made since thelast time the unit was shut down or a song was savedwill be lost. These lost data and settings cannot berecovered.