Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 60 page image

60 TASCAM DP-034 Turn the DATA wheel to set the standard frequencyof the A note between 435 and 445 Hz. The defaultsetting is 440 Hz.5 Play the instrument and begin tuning. The pitchname closest to the string appears above themeters. Tune the string roughly until the soundname that you want appears. Then, fine tune thestring until the rectangle at the middle of themeter darkens, showing that the string is in tune. Ifthe pitch is too low, a bar extends to the left of themiddle and if it is too high it extends to the right.The more out of tune, the longer the bar appears.When the pitch played matches the note shown, thenote name appears between the ¥ icons.6 When finished tuning, press the HOME button toreturn to the Home Screen.NOTEIf you want to monitor the input sound, press the RECbutton of a track that has INPUT A assigned to it.Oscillator mode1 When the recorder is stopped, press the TUNERbutton to open the TUNER screen.2 Press the F4 (OSC.) button to display the oscillatorscreen.The following settings can be made on this screen.CALIBUse this to adjust the standard frequency of A4. Thesetting range is 435Hz–445Hz.The default setting is 440Hz.NOTEUse this to set the note output. The setting range isC3–B5.The default setting is A4.LEVELUse this to set the output level. The setting range is 10(minimum) – 100 (maximum).The default setting is 50.Use the F3 (§) and F4 (¶) buttons to selectparameters, and use the DATA wheel to set theparameter values.Use the F2 (ON) button to turn the output ON and OFF.Use the F1 (CHROM) button to change to chromatictuner mode.3 When you have finished tuning, press the HOMEbutton to return to the Home Screen.Restoring the initial preferencesettingsYou can restore the PREFERENCE screen settings totheir initial values (the values that they had when the unitwas shipped from the factory). This operation is calledinitialization.1 When the recorder is stopped, press the MENUbutton to open the MENU screen.2 Turn the DATA wheel to select PREFERENCE, andpress the F4 (¥) button to open the PREFERENCEscreen.3 Use the F3 (§) and F4 (¶) buttons to select Execnext to the Initialize item.4 Press F2 (EXEC) to open a confirmation screen.5 Press F3 (YES) to initialize the unit. ThePREFERENCE screen reopens when the processfinishes.NOTEPress the F4 (NO) button to cancel initialization.10 – Miscellaneous Functions