TASCAM DP-03 134 Change the name (title) of the song as necessary.(See “Editing names” on page 35.)5 Press the F2 (EXEC) button to save the currentlyloaded song and create a new song.6 Press the HOME button to return to the HomeScreen.Connecting and setting the inputsources1 Connect an electric guitar to the INPUT A jack onthe rear panel.Guitar2 Set the INPUT A switch to GUITAR.TIPWhen connecting an electric-acoustic guitar with a built-in preamp or an active-type electric guitar, or when usingan effects pedal, for example, between the guitar and thisunit, set in the INPUT A switch to MIC/LINE.3 Set the INPUT B switch to INTERNAL MIC B to usethe built-in microphone on the right side of thefront panel (MIC B) as the input source for INPUT B.Set the guitar as the recording sourcefor TRACK 1By default, the recording source for tracks 1, 3, 5 and 7 isset to INPUT A (“A”), and the recording source for tracks2, 4, 6 and 8 is set to INPUT B (“B”). See ”Assigning inputs”on page 39.In the “Connecting and setting the input sources” sectionabove, we set a guitar as the input source for INPUT Aand the built-in microphone (INTERNAL MIC B) as theinput source for INPUT B, so the guitar can be recordedto tracks 1, 3, 5 and 7, while INTERNAL MIC B can berecorded to tracks 2, 4, 6 and 8. For this reason, there is noneed to change the input assignments in this example inorder to record a guitar to track 1.Adjusting and monitoring the inputlevel1 Press the HOME button to return to the HomeScreen.2 – Quick Start Guides
