Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 26 page image

26 TASCAM DP-03@ STANDBY/ON buttonWhen the power is in standby, press this button toturn it ON. When ON, press and hold this button to putthe power into standby. (See “Startup & shutdown” onpage 32.)# DC IN 12V jackConnect the dedicated AC adaptor (PS-1225L).$ PHONES jack (stereo mini jack)Connect headphones. Use the PHONES LEVEL knobon the top panel to adjust the volume.% LINE OUT jacks (unbalanced RCA)Use these to connect a monitoring system (poweredspeakers or an amplifier with speakers).^ INPUT B connector (balanced XLR)This is an input source when the INPUT B switch onthe top panel is set to MIC/LINE.This is an XLR-type mic/line input jack.You can also connect a condenser microphone thatrequires phantom power.(1: GND, 2: HOT, 3: COLD)NOTEDo not input signals into both the XLR and standard jacksat the same time.& INPUT B jack (balanced TRS standard jack)This is an input source when the INPUT B switch onthe top panel is set to MIC/LINE.You can input a line-level signal (balanced/unbalanced) or mic signal (balanced/unbalanced).* INPUT A jack (balanced TRS standard jack)This is an input source when the INPUT A switch onthe top panel is set to MIC/LINE or GUITAR.You can input a guitar/line-level signal (balanced/unbalanced) or mic signal (balanced/unbalanced).( INPUT A connector (balanced XLR)This is an input source when the INPUT A switch onthe top panel is set to MIC/LINE.This is an XLR-type mic/line input jack.You can also connect a condenser microphone thatrequires phantom power.(1: GND, 2: HOT, 3: COLD)NOTEDo not input signals into both the XLR and standard jacksat the same time.) REMOTE jack (2.5-mm TS jack)Connect a TASCAM RC-3F foot switch (sold separately)to allow a variety of remote control operations,including punch in/out (start and stop recording).Rear panel3 – Names and Functions of Parts