Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 50 page image

50 TASCAM DP-03CLEAN OUT TRK screenIN/OUT/TOThese points are used for editing. To change the IN, OUTor TO point, use the F3 (§) and F4 (¶) buttons to selectone. Then, use the REW (Ô) (TO ZERO) and F FWD() (TO LAST REC) buttons to move the cursor and theDATA wheel to set the time.IN point editing screenOUT point editing screenTO point editing screenDESTINATION TRKSelect the track that you want to be the destination for aCOPY, INSERT or MOVE operation. The choices depend onwhat you have already chosen for the SOURCE TRK asthe track to be edited.When a single track has been set as the SOURCE TRK,the DESTINATION TRK choices are 1 to 8 (singletracks).When a track pair (for example, 1/2) has been set as theSOURCE TRK, the DESTINATION TRK choices are1/2, 3/4, 5/6 and 7/8 (track pairs).When 1-8 (all tracks) has been set as the SOURCE TRK,the DESTINATION TRK choice is 1-8 (all tracks). Inother words, this setting cannot be changed in this case.COPY TIMESSet the number of times that the copied section will bepasted. Set the number between 1 and 99.COPY/PASTEThis function copies the audio data from between the INand OUT points on the COPY source track, and pastes iton the COPY destination track starting from the TO point.This operation does not change the COPY source track.This operation overwrites recorded data on the COPYdestination track. Therefore, the length of the COPYdestination track is not changed.You can make multiple copies in a single operation. Inother words, you can overwrite the COPY destinationtrack from the TO point with a designated number ofrepetitions of the COPY data.The following parameters are used in this operation.SOURCE TRK (• 1 to 8, 1/2, 3/4, 5/6, 7/8, 1-8)IN/OUT/TO•DESTINATION TRK•COPY TIMES•COPY/INSERT8 – Editing Tracks