Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 63 page image

TASCAM DP-03 633 Turn the DATA wheel to select REFORMAT.Press the F4 (¥) button to open the REFORMATscreen.A list of the MTR partitions and their sizes (not opencapacities) appear.A * marks the active partition.4 Turn the DATA wheel to select the partition thatyou want to reformat and press the F2 (EXEC)button.A pop-up message warning that all data on thepartition will be erased appears.5 Press the F3 (YES) button to reformat the partition.When reformatting finishes the• CARD menu reopens.After reformatting, one song is automatically created in•the MTR partition.To cancel reformatting, press the• F4 (NO) button.Reformatting the FAT partitionYou can also reformat just the FAT partition. The size of theFAT partition cannot be changed.CAUTIONYou cannot undo this operation! All data on the FATpartition will be erased, so be certain that you will not loseanything important when reformatting.1 When the recorder is stopped, press the MENUbutton to open the MENU screen.2 Turn the DATA wheel to select CARD, and press theF4 (¥) button to open the CARD menu screen.3 Turn the DATA wheel to select FAT REFORMAT,and press the F4 (¥) button.A pop-up message warning that all data on the FATpartition will be erased appears.4 Press the F3 (YES) button to reformat the FATpartition.When reformatting finishes the• CARD menu screenreopens.To cancel reformatting, press the• F4 (NO) button.Viewing the capacity of the MTRpartitionFollow these procedures to view the capacity of the MTRpartition.1 When the recorder is stopped, press the MENUbutton to open the MENU screen.2 Use the DATA wheel to select CARD, and press theF4 (¥) button to open the CARD screen.Use the DATA wheel to select PARTITION, andpress the F4 (¥) button to open the PARTITIONscreen, where you can view the capacity of the MTRpartition.11 – SD Card Management