Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 20 page image

20 TASCAM DP-03TIPPress the F4 (PARM) button to open the screen where youcan also adjust the parameters of the compressor.4 Press the F2 (ON) button to turn the compressorON. The word OFF at the top left of the screenchanges to ON.5 Press the F1 (BACK) button to return to the Homescreen.6 Press the PLAY (Á) button to listen to the stereomaster track with compression.NOTEIf the EQ item is also ON, the effect of the equalizer on thesound will also be heard.Normalizing the stereo master trackªNormalizing maximizes the volume of the stereo mastertrack.1 In mastering mode, press the F3 (NORM) button toopen the NORMALIZE screen.2 Press the F4 (EXEC) button to normalize the track.3 Press the F1 (BACK) button to return to the Homescreen.Rerecord the stereo master trackªRecord the master track with equalization andcompression applied to create a new stereo master track.1 In mastering mode, press and hold the RECORD (º)button and press the PLAY (Á) button.2 This will record over the master and create anew stereo master track with equalization andcompression applied.Creating an audio CD with themaster trackYou can use a stereo master track that you have created tomake an audio CD that can be played on an ordinary CDplayer, for example.Insert a CD1 In multitrack mode, press the CD button to openthe CD screen.CAUTIONThe• CD screen cannot be opened in any mode otherthan multitrack mode. If in mixdown or masteringmode, press the MIXDOWN/MASTERING buttonrepeatedly until you return to multitrack mode. If inbounce mode, press the BOUNCE button to openmultitrack mode.The disc tray will not open when the Home Screen or a•menu screen is shown. Open the disc tray when the CDscreen or CD PLAYER screen is shown.2 Press the F2 (ø) button or the disc tray eject buttonon the right side panel to open the tray slightly.Pull the tray out until it opens completely.3 Hold the edge of the disc with the label side up andput it into the tray so that its central hole is on theround protrusion in the center of the tray. Press thedisc gently near the center to mount it on the tray.2 – Quick Start Guides