TASCAM DP-03 754 Use the F3 (§) and F4 (¶) buttons to select theFROM item, and use the DATA wheel to select thetrack (song) to import.5 Use the F3 (§) and F4 (¶) buttons to select theTO item, and use the DATA wheel to select thepair of tracks that you want to use as the importdestination (Trk1-2, Trk3-4, Trk5-6 orTrk7-8).6 Press the F2 (EXEC) button to open a confirmationmessage, and press the F3 (YES) button to importthe file from the CD.The CD screen reopens after importing completes.Backing up song data to CDsYou can also back up (write) song data to CDs.1 In MULTITRACK mode, press the CD button to openthe CD screen.2 Put a blank CD-R/CD-RW or a CD-RW that you wantto erase into the disc tray.3 Use the DATA wheel to select CD BACKUP, andpress the F4 (¥) button.A list of songs (on the currently selected partition) isshown.4 Use the DATA wheel to select the song that youwant to back up, and press the F4 (NEXT) button.A screen where you can enter the name of the file thatyou will write to the CD appears.NOTEOnly one song can be written to a backup CD.5 Use the REW (Ô) (TO ZERO) and F FWD () (TOLAST REC) buttons and the DATA wheel to set thesong name with up to 8 characters). (See “Editingnames” on page 35.)6 Press the F2 (EXEC) button to open a confirmationmessage.7 Press the F3 (YES) button.8 The number of discs necessary to make the backupwill be shown. Prepare that number of discs. Thesediscs should be identical with the same type,manufacturer and capacity.NOTEBacking up a long song could require more than 2 CDs.9 Press the F3 (YES) button again.10 When writing to the first CD has completed, amessage appears requesting the next CD. Put thenext blank CD into the disc tray.11 After mounting the CD, a confirmation messageappears. Press the F3 (YES) button.12 When writing to the CDs has been completed, theCD screen reopens.13 – Using CDs