Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 46 page image

46 TASCAM DP-03NOTEThe marks are shown in the order they appear in the song,not by number.3 Use the F3 () and F4 () buttons to move thecursor between time fields.4 Turn the DATA wheel to change the value above thecursor. When adjusting, the value will carry overautomatically when it reaches the highest or lowestvalue in a field. For example, when turning theDATA wheel to increase the value in the secondsfield, the number will change from 59 to 0 and theminutes value will increase by one.NOTEYou can’t move a mark forward past the next mark in thelist, or backwards to before the previous mark in the list.5 After you have finished editing, press the F1 (EXIT)button to confirm the edited value and return tothe LOCATE LIST screen.Return To Zero (TO ZERO) and LastRecording Position (TO LAST REC)Use simple button operations to return to the top of asong or to the position where recording last started.Return to the zero point (song beginning at00:00:00:00)Press the REW (Ô) (TO ZERO) button while pressingand holding the STOP (ª) button. (TO ZERO function)Last Recording Position (the position recording laststarted)Press the F FWD () (TO LAST REC) button whilepressing and holding the STOP (ª) button.This function is useful when you want to record the samepassage again.Fast forward/rewind searchPress the REW (Ô) (TO ZERO) or F FWD () (TOLAST REC) button when stopped to rewind or fastforward, respectively.Each time you press one of these keys, the speed increasesfrom 10x to 50x, 100x and 1000x.Press these buttons during playback to search backwardor forward while pressing. The search speed is fixed at 10times normal playback speed.Repeat playbackUse the repeat playback function to play the same partagain and again.The repeated passage is time between the IN and OUTpoints.Using IN, OUT and TO pointsIn addition to setting the repeat playback interval, theIN and OUT points are also used to set track editingintervals and as the punch in and punch out points whenautomatically punching in and out. Moreover, thesepoints are used as the starting and ending points whencreating a master track.You can set these points during recording, playback orwhen the unit is stopped.NOTEThe IN, OUT and TO points cannot be set or edited at thefollowing times.During repeat playback•When in automatic punch in and out mode•When the recorder is in MIXDOWN or MASTERING•modeWhen the• LOCATE LIST or I/O SETTING screenis openSetting IN, OUT and TO pointsRegardless of whether the unit is stopped, playing backor recording, you can set these points at the positions youlike by pressing and holding the IN [SET IN], OUT [SETOUT] or TO [SET TO] button. The corresponding IN, OUTor TO point is set at the time when you began pressingand holding the button, and the time set appears belowa pop-up message (SET IN !, SET OUT ! or SETTO ! as appropriate).SET IN pop-up messageLocating to IN, OUT and TO pointsRegardless of whether the unit is stopped or playing back,you can press the IN [SET IN], OUT [SET OUT] or TO [SETTO] button to locate the corresponding point.You can also use the I/O SETTING screen to locate.1 Press the LOCATE LIST [LOCATE SET] button toopen a list of location marks.7 – Recorder Functions