12 TASCAM DP-03The MASTER fader adjusts the overall volume ofTRACKS 1–8. The standard position of the MASTERfader is “0”.Use TRACK 1–8 faders to adjust the balance of thetracks.Use the PHONES LEVEL knob to adjust the finalmonitoring volume.8 Use the TRACK 1–8 PAN knobs to adjust the stereoposition of each track signal.TIPPress the• STOP (ª) and REW (Ô) (TO ZERO) buttonsat the same time to return to the beginning of the song(ZERO point) (TO ZERO function) .If you press the wrong button and open a different•screen, press the HOME button to return to the HomeScreen at any time.Recording and masteringIn this section we will practice multitrack recording. Inthe following example, we will explain how to record arhythm guitar part with an electric guitar to track 1 anda lead guitar part to track 2. Then, we will use the built-inmicrophone to record vocals to track 3. Finally, we will mixdown the tracks to stereo.In this section, we assume that you have already followedthe instructions in the previous section, and that you haveconnected monitoring equipment, started the unit andinstalled the SD card.TIPThis example uses the built-in mic for recording vocals,but you could also connect an external mic to the INPUTA or INPUT B connector on the rear panel and record withit.Creating a new song1 When the recorder is stopped, press the MENUbutton to open the MENU screen.2 Use the DATA wheel to select the SONG item, andpress the F4 (¥) button to open the SONG screen.3 Use the DATA wheel to select the CREATE item,and press the F4 (¥) button to open the SONGCREATE screen.The song that has been created is given the name (title)“ SONG***“ (*** is a number).2 – Quick Start Guides
