Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 51 page image

TASCAM DP-03 51This function copies the audio data from between the INand OUT points on the COPY source track, and inserts iton the COPY destination track starting from the TO point.This operation does not change the COPY source track.This operation inserts recorded data into the COPYdestination track. The recorded data on the COPYdestination track after the TO point is offset by the amountof time used by the inserted audio data. Therefore, theCOPY destination track becomes longer.You can make multiple copies in a single operation. Inother words, you can insert a designated number ofrepetitions of the COPY data into the COPY destinationtrack from the TO point.The following parameters are used in this operation.SOURCE TRK (• 1 to 8, 1/2, 3/4, 5/6, 7/8, 1-8)IN/OUT/TO•DESTINATION TRK•COPY TIMES•MOVE/PASTEThe audio data between the IN and OUT points onthe MOVE source track is removed and pasted in theMOVE destination track starting from the TO point. Thisoperation leaves a silence between the IN and OUT pointson the MOVE source track.This operation overwrites recorded data on the MOVEdestination track. Therefore, the length of the MOVEdestination track is not changed.The following parameters are used in this operation.SOURCE TRK (• 1 to 8, 1/2, 3/4, 5/6, 7/8, 1-8)IN/OUT/TO•DESTINATION TRK•MOVE/INSERTThe audio data between the IN and OUT points on theMOVE source track is removed and inserted in the MOVEdestination track from the TO point. This operation leavesa silence between the IN and OUT points on the MOVEsource track.This operation inserts recorded data into the MOVEdestination track starting from the TO point. Therefore,the MOVE destination track becomes longer.The following parameters are used in this operation.SOURCE TRK (• 1 to 8, 1/2, 3/4, 5/6, 7/8, 1-8)IN/OUT/TO•DESTINATION TRK•OPEN (insert silence)This function inserts silence between the IN and OUTpoints on the selected track.This function splits the track at the IN point and shifts therecorded data after the IN point to after the OUT point.Therefore, the track becomes longer.The following parameters are used in this operation.OPEN TRK (• 1 to 8, 1/2, 3/4, 5/6, 7/8, 1-8, ALL)IN/OUT•8 – Editing Tracks