Tascam Digital Portastudio DP-03 Owner's Manual

Also see for Digital Portastudio DP-03: Manual

Contents

Tascam Digital Portastudio DP-03 Owner's Manual Manual pdf 37 page image

TASCAM DP-03 37NOTEAn SD card formatted by this unit can only have onepartition, so it is not usually possible to copy to a differentpartition. However, this unit can use an SD card that hasbeen created with multiple partitions on another TASCAMDP series unit, and copying between partitions is possiblein this case.7 Press the F4 (EXEC) button to copy the file(s) andreturn to the SONG screen.NOTETo cancel song copying, press the F1 (BACK) buttoninstead of the F4 (EXEC) button.8. Press the HOME button to return to the HomeScreen.Erasing songsYou can erase a single song or multiple songs at once. Youmight want to erase unneeded songs if the SD card startsto run out of open space.1 When the recorder is stopped, press the MENUbutton to open the MENU screen.2 Use the DATA wheel to select SONG, and press theF4 (¥) button to open the SONG screen.3 Use the DATA wheel to select ERASE, and press theF4 (¥) button to open the SONG ERASE screen,which shows a list of songs.4 Use the DATA wheel to select a song that you wantto erase and press the F4 (✔) button.A check appears in the checkbox next to the song.NOTETo remove the check from the checkbox, press the F4 (✔)while the song is selected.5 To erase multiple songs, repeat step 4.6 After selecting all songs that you want to erase,press the F2 (EXEC) button. A confirmation screenopens.7 Press the F3 (YES) button.After the songs are erased, the SONG screen reopens.NOTETo cancel erasing a song, press the F4 (NO) button insteadof F3 (YES) button.8 Press the HOME button to return to the HomeScreen.NOTEEvery MTR partition must always have at least one song,so if you erase all the songs on a partition, a new song iscreated automatically.Protecting songsIf you protect a song, editing, recording and erasing ofthat song is prevented.1 Load the song that you want to protect.2 When the recorder is stopped, press the MENUbutton to open the MENU screen.3 Use the DATA wheel to select SONG, and press theF4 (¥) button to open the SONG screen.4 Use the DATA wheel to select PROTECT, and pressthe F4 (¥) button to open the SONG PROTECTscreen, where you can turn protection ON and OFF.5 Use the DATA wheel to set PROTECT to ON, andpress the F2 (EXEC) button.After PROTECT is turned ON, the SONG screenreopens.6 Press the HOME button to return to the HomeScreen.NOTEIn the song list used to copy, erase and conduct other•functions, a lock icon ( ) appears next to protectedsongs.If you try to execute a prohibited operation (edit,•record, erase) on a protected song, a “SongProtected” message appears and the operation isprevented.To remove protection from a song, follow the above•procedures but set PROTECT to OFF in step 4.5 – Song Management