Walker H37i Operator's Manual

Also see for H37i: Operator's manual Operator's manual Operator's manual

Operating Instructions28CONTROL IDENTIFICATION, LOCATION, ANDFUNCTIONCAUTIONBefore operating the mower, become famil-iar with the location and function of all op-erator controls. Knowing the location,function, and operation of these controls isimportant for safe and efficient operationof the mower.Ignition SwitchThe ignition switch is located on the right front of thebody and is used to start and stop the engine. Theswitch has three positions: “O” is the OFF position,ON (RUN) is the position that the key returns to afterstarting, and “S” is the START position. When starting the engine, turn the key clockwise to the “S”position.Do not hold the key in the “S” position longer than 10seconds. If the engine does not start, return the keyto the “O” position for at least 60 seconds beforemaking a restart attempt. Prolonged cranking candamage the starter motor and shorten battery life.Release the key when the engine starts, and it willreturn to the ON (RUN) position. To stop the engine,rotate the key counterclockwise to the “O” position.OFF ONSTARTIgnition SwitchOperating ControlsParkingBrakeBlade Clutch(PTO)ThrottleBody LiftHandleHourmeterForward SpeedControl (FSC)BodyLatchIgnitionSwitchWarningHornWarningLights (3) Circuit BreakerSteeringLevers