Walker H37i Operator's Manual

Also see for H37i: Operator's manual Operator's manual Operator's manual

58Maintenance Instructions CLEANING3. Fit tilt bar into the socket on front of deck housing and secure with hitch pin.Use Hitch Pin toSecure Tilt Bar.Tilt Bar Installed4. Remove footrest or, if equipped with adjustablefootrests, move the footrest to the full forwardlocking position.8746-2Full Forward/Locked PositionAdjustable Footrest in Full Forward/LockedPosition for Deck Tilt-Up5. Raise deck to tiltup position using tilt bar andsecure in position by inserting the deck hook inthe tiltup latch on the tractor body as shown inthe Deck Secured in TILT-UP Position photo.Tilt BarTiltUp Hook andLatch ConnectedTiltUpHookTiltUpLatchHitch PinDeck Secured in TILT-UP PositionDANGERDo not operate the mower with deck in tilt-up position. Do not move the tractor withthe deck in the tilt-up position.6. Clean grass buildup underneath the deck usinga pressure washer (and scraper if required).NOTE: If the buildup is severe, it may be easierto clean the deck by removing the deck assembly from the tractor and standing the deck assembly on its “nose”.NOTE: While some degree of material buildupin the mower deck housing can be tolerated, apoint is finally reached where cutting qualitydeteriorates and clogging begins to occurbecause of too much buildup on the baffling andhousing.7. Lower the deck to the normal operating positionand rotate locking arms downward into theLOCKED position.