Walker H37i Operator's Manual

Also see for H37i: Operator's manual Operator's manual Operator's manual

59Maintenance Instructions CLEANINGCAUTIONDo not operate mower with deck tilt-uppivot joint UNLOCKED. Make sure lock-ing arms are in the LOCKED position andthe tilt-up joint is rigid (locked).8. Remove tilt bar and stow on carrier frame.9. Move footrests to desired position.Transaxle HousingKeeping the housing on the transaxles clean andfree of obstruction is essential to avoid overheat-ing the transaxle fluid and shortening transaxle life.The housing should be checked every 100 hoursand cleaned if necessary.To clean the housing, use compressed air and/or apressure washer. Pay close attention to any oily dirtbuildup on the transaxle housings. This may be theresult of an oil leak. If an oil leak is noticed, contactyour local Walker dealer.CoolingFinsTransaxle Housing and Cooling FinsIMPORTANT: In case an oil leak develops on theinput shaft, the cooling fan blowing dusty air and oilon the transaxle will quickly cover the housing andpack the cooling fins with oily dirt. If this conditionoccurs, contact your dealer immediately to avoidoverheating and damaging the transaxle.An additional procedure in maintaining transaxlecooling is to inspect the cooling fans. Replace thefan(s) if blades are missing or damaged.CoolingFansTransaxle Cooling Fans