Using the ControlCentre15-6 WorkCentre Pro 665/685/765/785Setting the Fax Send OptionsYou can select the options you want to use for fax transmissions onthe Fax Send page. For example, you can choose to include a sendheader and cover sheet with each fax, and select the number of timesthe WorkCentre redials a fax number after receiving a busy signal.Setting the Cover Sheet and Send Header Options1 Click the Fax icon and then click the Fax Send tab.2 Click Include send header to print the date and time of the faxtransmission, the recipient’s name and fax number, thetransmission serial number, the page number, and the job or filenumber at the top of each faxed page.3 To specify where the send header is printed, select one of thefollowing options:Inside margin To print the header close to the document text. Ifthe document text is near the top edge of the paper, the headerand text might overlap.Outside margin To print the header at the top of the page toavoid overlapping the document text.4 Click Add default cover sheet to fax a separate cover page withyour document.The WorkCentre provides a cover sheet that you can use withyour faxes, or you can create your own cover sheet. Forinformation on how to create a cover sheet, see the TransmittingDocuments chapter in this guide.5 Click Apply to set the options at the WorkCentre.Choosing How to Send Faxes1 Click the Fax icon and then click the Fax Send tab.2 Click Always send from memory to send a fax after it’s scannedand stored in memory.The WorkCentre assigns a job number to each fax stored inmemory. You can later identify the fax by its job number shouldyou need to cancel it. When a fax is stored in memory, the
