WorkCentre Pro 665/685/765/785 D-3extension cord do not exceed the extension cord ampere rating. Also,make sure that the total amperage of all products plugged into thewall outlets does not exceed the outlet rating.Do not put your hands into the fuser area, located just inside the exittray area, as you may be burned.Ozone: This product produces ozone during normal operation. Theozone produced is dependent on copy volume and is heavier than air.Providing the correct environmental parameter, as specified in theXerox installation procedures, ensure that concentration levels meetsafe limits.If you need additional safety information concerning the copier orXerox supplied materials you may call the following number:Europe: +44 (0)1707 353434USA: 1800 928 6571Laser Safety InformationThis equipment is certified as a Class 1 laser product under the U.S.Department of Health and Human Services (DHHS) RadiationPerformance Standard according to the Radiation Control for Healthand Safety Act of 1968. This means that the equipment does notproduce hazardous laser radiation.All laser light emitted inside the equipment is completely confinedwithin protective housings when any part of the facsimile is opened.This means that the facsimile is safe to use during normal operationand maintenance.WARNINGAdjustment or performance of procedures otherthan those specified herein may result inhazardous laser exposure. Only trained andqualified personnel may open covers or removeparts that are not explicitly shown and describedin the WorkCentre Pro 635, 645, 657 User’s Guideas being accessible to the operator.The Center for Devices and Radiological Health (CDRH) of the U.S.Food and Drug Administration implemented regulations for laserproducts in 1976. These regulations apply to laser products
