Using the ControlCentre15-24 WorkCentre Pro 665/685/765/785Printing ReportsYou can set up the WorkCentre to print a variety of reports to provideyou with information about fax transmissions and receptions. You canalso print the Settings Report, which lists the current defaults set onthe WorkCentre.Activity Report SetupThe Activity Report provides information about the faxes sent andreceived. It also includes the scan, print, drum, and toner counter.You can set the WorkCentre to automatically print an Activity reportafter 40 transmissions and receptions.1 Click the Reports icon.2 Click Activity report.3 Click Apply to set the option at the WorkCentre.You can also specify the type of information to print when you pressthe Activity function key. See Setting the Machine Defaults.Confirmation Reports SetupYou can set the WorkCentre to automatically print a report after eachtransmission (Always) or after a failed transmission (On error), or tonot print a report (Never).1 Click the Reports icon.2 In the Confirmation box, select the option you want when faxingdocuments using Direct Send (the WorkCentre sends eachdocument page as it is scanned).3 In the Confirm send from memory box, select the option you wantwhen faxing documents using Memory Send (the WorkCentrestores the complete document in memory before it is sent).If you select either Always or On error, you can click Show firstfax page to have the WorkCentre print the first page of the fax onthe report.4 In the Group send box, select the option you want when faxingdocuments to a group.If you select either Always or On error, you can click Show firstfax page to have the WorkCentre print the first page of the fax onthe report.
