8825/8830 DDS User Guide/68ReferenceConfiguration MenuCopy OptionsMedia Series (continued)The operator may select one or more media series to be displayed.Navigate to the MEDIA SERIES screen, and use the Next and Previousscreens to select a media series. Press the Enter key to enable or disable aseries. When you have configured each media series as desired, press theExit key to leave the MEDIA SERIES screen.Custom Media FormatsThe customer may specify up to 6 custom formats using the CUSTOMMEDIA FORMATS screen.Note: the formats are expressed in the units of measurement selected in theCONFIGURATION⇒LOCALIZATION⇒DISPLAY UNITS screen.To enter a format, press the Next or the Previous key until the desired fieldis highlighted. Enter the value for the field, using the numeric keys. Pressthe Enter key to accept the value. Continue until all the desired formats aredefined.Widths in excess of 36 inches (91.4 mm) or less than 11 inches (27.9 mm)are not valid.Note: any custom formats that are not defined are automatically set to zeroand are not displayed elsewhereWhen there are no more custom formats to be defined, press the Exit key toleave the CUSTOM MEDIA FORMATS screen.MEDIA SERIESANSI ISO AARCH ISO BCUSTOM MEDIA FORMATS (IN)0.0 X 0.0 0.0.X 0.00.0 X 0.0 0.0.X 0.00.0 X 0.0 0.0.X 0.0CUSTOM MEDIA FORMATS (MM)0 X 0 0 X 00 X 0 0 X 00 X 0 0 X 0LengthWidth
