8825/8830 DDS User Guide/86ReferenceScanner Diagnostics (continued)Memory TestsThe MEMORY TESTS selection checks the memory sections of the controlelectronics in the Scanner.To test the memory sections, select MEMORY TESTS from the SCANNERDIAGNOSTICS MENU.The MEMORY TESTS screen is displayed.Each letter corresponds to a test, identified in the table to the right.To the right of each letter is a digit that signifies the number of times that testhas been executed and passed.If a test fails one or more times, XX will be displayed in place of the numberof successful test executions for that test. If XX is displayed, call for service.Note: the test sequence will be executed repeatedly until the operatorpresses the Exit key.Press the Exit key to terminate the test and leave the MEMORY TESTSscreen.Test DescriptionA Line MemoryB Normalization MemoryC Map MemoryD System MemoryE ROM MemoryF NVRAM MemoryG Output FIFO MemoryH Scaler MemoryI Grayscale Enhancement MemoryMEMORY TESTSA) 0 B) 0 C) 0 D) 0 E) 0F) 0 G) 0 H) 0 I) 0PRESS START TO BEGIN.
