Xerox DocuMate 4790User’s Guide62In the Scan Configuration Properties window, the Scan Settings, Page Settings, Advanced Settings,and Redaction Settings tabs are always available. When the Kofax VRS module is installed, the VRSSettings tab will also be available for all destinations.Based on the selected destination, additional settings tabs may also be available. If you see one ofthese additional settings tabs please refer to the appropriate section, as listed below, for instructionson configuring these destination specific options.• Use the Storage Options tab to choose the storage folder for scans sent to the Transfer toStorage destination, as described on page 77.• Use the Device Settings tab to configure Printer or Fax destinations, as described on page 85.• Use the PaperPort tab to choose the destination folder, in the Nuance PaperPort application, asdescribed on page 87.• Use the SharePoint tab to specify a SharePoint site, user credentials, and destination folder, asdescribed on page 89.• Use the FTP Settings tab to specify an FTP site, user credentials, and destination folder, asdescribed on page 92.• Use the SMTP Configuration tab to specify an SMTP server, user credentials, and destinationemail address, as described on page 95.Scan Settings TabOn the Scan Configuration Properties dialog box, type a name.Mode—Select a scanning mode:• Black&White to scan in black and white. For example, letters and memos are usually scanned inblack and white.• Grayscale to scan items such as documents containing drawings or black and white photographs.• Color to scan color photographs and other color items. Color scans have the largest file size.Resolution—Drag the slider to the right or left to adjust the dots per inch (dpi) of the resolution. Thehigher the dpi setting, the sharper and clearer the scanned image. However, higher dpi settings takelonger to scan and produce larger files for the scanned images.If the configuration islocked, click the lockto unlock it. The iconbecomes a key.Type a new name for theconfiguration.Select the scan modeand drag the slider to setthe resolution.Drag the sliders to set theBrightness and Contrast.
